76060-5166

Specifications

• EU RoHS
  Compliant
• Type
  Backplane
  Type describes the type of the component.
• Gender
  RCP
  Gender describes the connector kind (Plug, Receptacle, Male or Female).
• Number of Contacts
  150
  Number of Contacts describes the number of circuits or positions in the connector. Alternative Terms, Positions, Pins, Leads, Poles, circuits.
• Termination Method
  Press Fit
  Termination Method describes the shape of pins, leads, terminals or connectors to show the way of its termination to a wire or PCB.
• Terminal Pitch (mm)
  1.9
  Terminal Pitch describes the distance between circuits (positions) measured from center-to-center of adjacent conductors in the same row and from board direction.
• Body Orientation
  Right Angle
  Body Orientation describes the direction of terminal, connector or body towards board or cable else describes the body style.
• Speed Rating (Gbps)
  25
  Speed Rating considered as a figure of merit for comparing relative performance between connectors.
• Maximum Current Rating (A)
  0.75/Contact
  Maximum Current Rating describes the maximum allowable continuous current that can be passed through a component or a conductor without causing degradation of performance.
• Maximum Voltage Rating
  30VDC|30VAC
  Maximum Voltage Rating describes the maximum value of D.C. voltage or A.C. voltage capable of being applied continuously to a resistor at the rated ambient temperature. Rated Voltage shall be calculated from the following formula. Rated Voltage(V) = {Rated Power(W) * Nominal Resistance()} When the nominal resistance value exceeds the critical resistance value, the rated voltage is limited to the maximum working voltage.
• Minimum Operating Temperature (°C)
  -55
  Minimum Operating Temperature describes the minimum temperature that the device can function correctly while working.
• Maximum Operating Temperature (°C)
  85
  Maximum Operating Temperature describes the maximum temperature that the device can function correctly while working.
• Mating Cycle (Cycles)
  200
  Mating Cycle describes the number of insertion and withdrawal cycles that product must be capable of withstanding while remaining within the performance levels of the applicable specification.
• Packaging
  Tray
  Packaging describes the method of containing/packaging a product for delivery or sales.
• Product Weight (g)
  33.192
  Product Weight describes the mass or weight of the product.
• Product Length (mm)
  38
  Product Length describes the overall length dimension in the length direction.
• Product Depth (mm)
  32.21
  Product Depth describes the overall depth or width dimension in the depth direction.
• Product Height (mm)
  21.5
  Product Height describes the overall product height in the height direction.
• Tradename
  Impact™
  Tradename describes the official name under which a company does business. It is also known as a doing business as name, assumed name, or fictitious name. A trade name does not afford any brand name protection or provide you with unlimited rights for the use of that name. However, registering a trade name is an important step for some but not all businesses.
• Mounting
  Through Hole
  Mounting indicates the method of mounting the device.